|
 |
DL-FLEX-UP - Flexible linear LED Lighting systemThe
DL-FLEX-UP linear "tape" type lighting system has been designed
to meet the specific requirements of residential and commercial architects,
interior designers, sign-making companies, and display companies. DL-Flex-Up
provides an ease of installation
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock Number |
Description |
Price |
Purchase |
Step 1 - Measure and order the length of DL-Flex Up required - sold in 11 3/4" strips |
|||
| DL-FLEX-UP |
Sold by the foot (11 3/4"), each section
is designed to plug into the next. Available in 3 white color temperatures |
$23.50 |
|
Step 2 - (Optional) If desired, order the aluminum mounting channel and the clear or frosted dust cover in length needed |
|||
DL-FLEX-CH6 |
Optional Aluminum mounting
channel comes in 6 foot lengths and may be cut in the field to size.
Can easily be installed using liquid nails or similar or similar.
May also be installed using flat head counter-sunk screws. (Make
sure screws are flat to the inside surface of the channel). |
$38.00 |
|
DL-FLEX-COVER |
Optional 6 foot length clear
or frosted lens dust cover to protect the LED's. The frosted len
reduces “the dots” of light creating a simple “glow”
for a direct view delineation. The covers can only be used with
the optional mounting channel. |
$21.00 |
|
Step 3 - Order your power connector(s) and other accessories as needed |
|||
DL-FLEX-PC |
The DL-FLEX-PC is a 12 inch
power connector and at least one is required
to power up your system. One end of the connector will attach to
the end of your FLEX-UP system and the other end to your LED driver. |
$9.00 |
|
DL-FLEX-PC-HW |
FOR HARD WIRE INSTALL - The DL-FLEX-PC-HW is a 12 inch
power connector that is used in a hard wire install, where your own wire is already in place. Usually used along with the DL-PS-PT-M which attaches to the end of the required driver. At least one is required to power up your hard wire system. One end of the connector will attach to
the end of your FLEX-UP system and the other end to your wire coming from the LED driver. |
$8.00 |
|
DL-FLEX-CC6 |
The DL-FLEX-CC6 is a 6 inch
connecting cable. Not required for a straight run, however, if you
have any bends, angles or spaces you do not want to have light showing,
use either this or the 12 inch length connector below. These are
used to turn a corner. |
$9.00 |
|
DL-FLEX-CC12 |
The DL-FLEX-CC12 is a 12
inch connecting cable. Not required for a straight run, however,
if you have any bends, angles or spaces you do not want to have
light showing, use either this or the 6 inch length connector above.
These are used to turn a corner. |
$10.00 |
|
DL-FLEX-X-CONN |
To split one run into multiple
runs you may use this special DL-FLEX-X-CONN Connector. This universal
“L”, ”X” & “T” connector
allows |
$10.00 |
|
DL-PS-2Y |
Split your LED power supply
into two separate feeds with this 2-Way breakout splitter. |
$17.00 |
|
DL-PS-3Y |
Split your LED power supply
into three separate feeds with this 3-Way breakout splitter. |
$22.00 |
|
DL-PS-EXT48 |
Need more length from your
LED driver to the power connector. This 48 inch extension cable
may be just what you need to finish that install. Or for an even
longer extension use the 96 inch length below. |
$15.00 |
|
DL-PS-EXT96 |
Need more length from your
LED driver to the power connector. This 96 inch extension cable
may be just what you need to finish that install. Or for a shorter
length extension use the 48 inch length above. |
$23.00 |
|
DL-PS-PT-M |
Hard wire option - Use the DL-PS-PT-M to remotely install the LED driver and use your own wiring to connect to the DL-FLEX-UP. Connector attaches to the plug-in end of the driver and ends in pig-tails for this purpose. Use the DL-FLEX-PC-HW at the end of your runs to install to the DL-FLEX-UP |
$9.00 |
|
Step 4 - Order a plug in LED Driver based on the total wattage of your FLEX-UP system |
|||
DL-PS-WP24/24 |
24 Watt / 24 volt LED driver
with wall plug in module. Will operate up to 18 feet of LED-FLEX-UP
lighting. |
$52.00 |
|
DL-PS-24/24 |
24 Watt / 24 volt LED driver
with wall plug in module. Will operate up to 13 feet of LED-FLEX-UP
lighting. |
$52.00 |
|
DL-PS-36/24 |
36 Watt / 24 volt LED driver
with wall plug in module. Will operate up to 27 feet of LED-FLEX-UP
lighting. |
$69.00 |
|
DL-PS-60/24 |
60
Watt / 24 volt LED driver with wall plug in module. Will operate
up to 46 feet of LED-FLEX-UP lighting. (Note: maximum run is 30
feet. For larger jobs off of one driver, use a breakout splitter
from accessories above) |
$85.00 |
|
|
|||
LC-DIM-5A |
This optional dimming controller connects between the LED driver and the DL-FLEX-UP allowing you dim the LED-FLEX-UP system from 100% to 0 % using the build in dial control on top. Easy plug-in installation. |
$195.00 |
|
LC-DIM100-RF |
This optional dimming controller operates off of a remote control unit (included) and connects between the LED driver and the DL-FLEX-UP allowing you dim the LED-FLEX-UP system from 100% to 0 % using the remote control only. Easy plug-in installation or optionally may be hard wired. Please note: The dimming operation is controlled by the remote unit only and controller can be located remotely |
$255.00 |
|
For other available options to our DL-FLEX-UP System, including larger drivers, hard wire type power supply systems, other dimming options, carpet runs, etc. please call us at 1-800-841-4666 or email us at sales@brodwax.com |
|||
