DL-FLEX-UP - Flexible linear LED Lighting system by Jesco Lighting Group - Now Fully Dimmable!

The DL-FLEX-UP linear "tape" type lighting system has been designed to meet the specific requirements of residential and commercial architects, interior designers, sign-making companies, and display companies. DL-Flex-Up provides an ease of installation
and a quality of output that is currently unequalled. Just follow the ordering steps below to order your simple "plug and play" or "direct hard wire" LED flex system that will provide you with years and years of maintenance free operation.

FEATURES AND BENEFITS
• Ultra bright surface-mount LEDs available in 4 Colors and 3 Whites.
• Highly flexible material can be applied to most accessible surfaces.
• Low power consumption, heat, voltage.
• Flexible circuit board technology.
• State of the art LED driver technology ensures consistent illumination levels.
• Mounts with 3M Double sided tape.
• Optional Aluminum mounting channel with clear and opaque covers.
• Optional Dimming Drivers and Controls available.
• Smooth 120° light distribution.
• Long life LEDs: 50,000-100,000 hours.
• No ultra violet (UV/IR) radiation.
• No Mercury.

Follow the simple ordering instructions below

Stock Number

Description

Price

Purchase

Step 1 - Measure and order the length of DL-Flex Up required - sold in 11 3/4" strips and 4" strips

DL-FLEX-UP

Sold by the foot (11 3/4"), each section is designed to plug into the next.
Available in 4 white color temperatures
2700K - Incandescent White
3000K - Warm White
4000K - Standard Cool White
6000K-Day Light
as well as 4 static colors (red, yellow, green or blue)
Each section contains 18 LED's and uses only 1.3 watts (0.9 watts for Red & Yellow)
• Highly flexible material can be applied to most accessible surfaces. Peel and stick installation.
• Optionally choose the Aluminum mounting channel with clear or opaque covers - available below
Special plugs simplify installation and assure contact, avoiding installation and failures that plague competing systems
11 3/4"L x 5/16"W x 1/8"H
MAXIMUM CONTINUOUS RUN - 30 FEET
Click here to download detailed installation instructions & spec sheets

$22.95
per foot
(11 3/4")



Light Color



Total Feet

DL-FLEX-UP4
4" DL-FLEX-UP

Use 4" sections to complete runs where cutting is not practical (cutting ends the continuous power feed), such as a corner cabinet where the power will need to continue to the next run (usually through a DL-FLEX-X-CONN)
Available in 4 white color temperatures
2700K - Incandescent White
3000K - Warm White
4000K - Standard Cool White
6000K-Day Light
as well as 4 static colors (red, yellow, green or blue - NOTE: RED AND YELLOW are 6" ONLY)

4"L x 5/16"W x 1/8"H
MAXIMUM CONTINUOUS RUN - 30 FEET
Click here to download detailed installation instructions & spec sheets

$11.95
per 4" section



Light Color



Total Sections

Step 2 - (Optional) If desired, order the aluminum mounting channel and the clear or frosted dust cover and accessories

DL-FLEX-CH6

Optional Aluminum mounting channel comes in 6 foot lengths and may be cut in the field to size. Can easily be installed using liquid nails or similar . May also be installed using the optional mounting clips below.
6’L x 9/16” W x 17/64” H
Click here to download detailed installation instructions & spec sheets

$38.00
per 6 foot length
(field cutable)



Quantity

DL-FLEX-COVER

Optional 6 foot length clear or frosted lens dust cover to protect the LED's. The frosted len reduces “the dots” of light creating a simple “glow” for a direct view delineation. The covers can only be used with the optional mounting channel.
Click here to download detailed installation instructions & spec sheets

$21.00
per 6 foot length
(field cutable)


Cover Type

Quantity

DL–FLEX–CH–CLIP
DL-FLEX-CLIPS

Mounting Clip for 6’ Mounting channel (2 pieces). Note: Channel may be attached using liquid nails. These clips should be used where liquid nails is not practical.
Click here to download detailed installation instructions & spec sheets

$1.95
per pack of 2



Quantity

DL–FLEX–CH–EC
DL-FLEX-CLIPS

End Cap for DL–FLEX–CH6 Mounting channel. Use this for a finished look.
Click here to download detailed installation instructions & spec sheets

$1.95
each



Quantity

DL–FLEX–CH–EC
DL-FLEX-CLIPS

End Cap for DL–FLEX–CH6 Mounting channel. Use this for a finished look.
Click here to download detailed installation instructions & spec sheets

$1.95
each



Quantity

DL–FLEX–CH–LE
DL-FLEX-CLIPS

Live End Cap for DL–FLEX–CH6
Hole allows cable to pass through finished look.
Click here to download detailed installation instructions & spec sheets

$11.95
each



Quantity

Step 3 - Order your power connector(s) and other accessories as needed
Plug and Play System -- Power Connectors

DL-FLEX-PC

The DL-FLEX-PC is a 19 inch plug and play power connector and at least one power connector is required to power up your system. One end of the connector will attach to the end of your FLEX-UP system and the other end to your LED driver. Unlike the PC2 below this has a 12" flex tape lead
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

DL-FLEX-PC2
DL-FLEX-PC2

The DL-FLEX-PC2 is a 14 inch plug and play power connector and at least one power connector is required to power up your system. One end of the connector will attach to the end of your FLEX-UP system and the other end to your LED driver. Unlike the standard PC above this has no tape, only a wire and connector
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

DL-FLEX-PT
DL-FLEX-PC2

The DL-FLEX-PT is an OPTIONAL 14 inch plug and play power OUTPUT connector . One end of the connector will attach to the end of your FLEX-UP system and the other end to external accessories using a Female DC plug . This item is very rarely used on plug and play systems
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

Hard Wire System -- Power Connectors

DL-FLEX-PC-HW

FOR HARD WIRE INSTALLS - The DL-FLEX-PC-HW is a 19 inch power connector that is used when using a hard wire power supply and your own wiring. At least one power connector is required to power up your hard wire system. One end of the connector will attach to the end of your FLEX-UP system and the other end to your wire coming from the LED driver or dimming module. Unlike the PC2-HW below this has a 12" flex tape lead
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

DL-FLEX-PC2-HW

FOR HARD WIRE INSTALLS - The DL-FLEX-PC2-HW is a 12 inch power connector that is used when using a hard wire power supply and your own wiring. At least one power connector is required to power up your hard wire system. One end of the connector will attach to the end of your FLEX-UP system and the other end to your wire coming from the LED driver or dimming module. Unlike the PC-HW above this has no tape, only a wire and connector
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

DL-FLEX-PT-HW

FOR HARD WIRE INSTALLS - The DL-FLEX-PT-HW is a 13 inch output power connector. This is optional, but can be extremely useful for extending your flex run over a distance. For example: a run using one power supply that has to travel over a stove or other appliance. Use the DL-FLEX-PT-HW as output from the flex-up tape to your own wire, run that wire over the appliance, and then into a DL-FLEX-PC-HW (or PC2) to continue the run.
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

Other Accessories

DL-FLEX-CC6

The DL-FLEX-CC6 is a 6 inch connecting cable. Not required for a straight run, however, if you have any bends, angles or spaces you do not want to have light showing, use either this or the 12 inch length connector below. These are used to turn a corner.
Click here to download detailed installation instructions & spec sheets

$9.00
each



Quantity

DL-FLEX-CC12

The DL-FLEX-CC12 is a 12 inch connecting cable. Not required for a straight run, however, if you have any bends, angles or spaces you do not want to have light showing, use either this or the 6 inch length connector above. These are used to turn a corner.
Click here to download detailed installation instructions & spec sheets

$10.00
each



Quantity

DL-FLEX-X-CONN

To split one run into multiple runs you may use this special DL-FLEX-X-CONN Connector. This universal “L”, ”X” & “T” connector allows
for the direct connection of up to 4 LED's
strips.
Click here to download detailed installation instructions & spec sheets

$10.00
each



Quantity

DL-PS-2Y

Split your Plug and Play LED power supply into two separate feeds with this 2-Way breakout splitter.
Useful to overcome the 30 foot run limit using a 60 watt LED driver (DL-PS-60/24)
Click here to download detailed installation instructions & spec sheets

$17.00
each



Quantity

DL-PS-3Y

Split your Plug and Play LED power supply into three separate feeds with this 3-Way breakout splitter.
Useful to overcome the 30 foot run limit using a 60 watt LED driver (DL-PS-60/24)
Click here to download detailed installation instructions & spec sheets

$22.00
each



Quantity

DL-PS-EXT48

Need more length from your Plug and Play LED driver to the power connector. This 48 inch extension cable may be just what you need to finish that install. Or for an even longer extension use the 96 inch length below.
Click here to download detailed installation instructions & spec sheets

$15.00
each



Quantity

DL-PS-EXT96

Need more length from your Plug and Play LED driver to the power connector. This 96 inch extension cable may be just what you need to finish that install. Or for a shorter length extension use the 48 inch length above.
Click here to download detailed installation instructions & spec sheets

$23.00
each



Quantity

Step 4 - Order a Plug and Play or Hard Wire, Dimmable (120v only) or non-dimmable power supply based on the total wattage and installation type of your DL-FLEX system

Plug and Play Power Supplies (LED Driver)

DL-PS-WP24/24

24 Watt / 24 volt LED driver with wall plug in module. Use with the DL-FLEX-PC or DL-FLEX-PC2 in step 3 above to connect to your system. May be dimmed with LC-DIM5A.
3 1/4" L × 1 5/8" W × 1 1/4" H

$39.00
each



Quantity

DL-PS-24/24

24 Watt / 24 volt LED desktop style driver with cord & plug. Use with the DL-FLEX-PC or DL-FLEX-PC2 in step 3 above to connect to your system. May be dimmed with LC-DIM5A.
3 1/2" L × 1 1/2" W × 1" H

$49.00
each



Quantity

DL-PS-48/24

48 Watt / 24 volt LED desktop style driver with cord & plug. Use with the DL-FLEX-PC or DL-FLEX-PC2 in step 3 above to connect to your system. May be dimmed with LC-DIM5A.
4 3/8" L × 2" W × 1 1/2" H

$59.00
each



Quantity

DL-PS-60/24
60 Watt power supply - plug in

60 Watt / 24 volt LED desktop style driver with cord & plug. Use with the DL-FLEX-PC or DL-FLEX-PC2 in step 3 above to connect to your system. May be dimmed with LC-DIM5A.
4 1/4" L × 2" W × 1 1/2" H

$79.00
each



Quantity

DL-PS-100/24
100 Watt power supply - plug in

100 Watt / 24 volt LED desktop style driver with cord & plug. Use with the DL-FLEX-PC or DL-FLEX-PC2 in step 3 above to connect to your system. May be dimmed with LC-DIM5A
5 3/4" L × 2 1/2" W × 1 1/4" H

$129.00
each



Quantity

Hard Wire - NON - DIMMABLE Power Supplies (LED Driver) - 100-240 Volt AC Input

DL-PS-20/24-JB
Hard Wire Power Supply

20 Watt / 24 volt LED hard wire driver in a junction box. 100-240V AC . Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system May be dimmed with LC-DIM5A-HW.
8 7/8" L × 1 1/2" W × 1 3/8" H

$109.00
each



Quantity

DL-PS-60/24-JB
Hard Wire Power Supply

60 Watt / 24 volt LED hard wire driver in a junction box. 100-240V AC . . Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system . May be dimmed with LC-DIM5A-HW.
11 1/2" L × 3 1/4" W × 2 3/8" H

$159.00
each



Quantity

DL-PS-100/24-JB
Hard Wire Power Supply

100 Watt / 24 volt LED hard wire driver in a junction box. 100-240V AC . . Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system . May be dimmed with LC-DIM5A-HW.
12" L × 3" W × 2 3/8" H

$219.00
each



Quantity

DL-PS-150/24-JB
Hard Wire Power Supply

150 Watt / 24 volt LED hard wire driver in a junction box. 100-240V AC .. Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system . May be dimmed with LC-DIM5A-HW.
11 1/2" L × 8 1/8" W × 2 3/8" H

FOR HIGHER WATTAGE - CALL

$339.00
each



Quantity

Hard Wire FULLY DIMMABLE Power Supplies (LED Driver) - 120 Volt AC Input

20L24DC
DIMMING DRIVERDimming Driver

20 Watt / 24 volt LED Magnetic DIMMABLE hard wire driver in a junction box. 120V AC Input. Compatible with most Magnetic Low Voltage dimmers (see list)
Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system .
Note: ONLY FOR USE WITH 120 Volt AC systems and a compatible dimmer switch. If you will not be dimming - DO NOT USE
5.03" L × 2.14" W × 2" H
Click for specs and compatible dimmers

$79.00
each



Quantity

40L24DC
DIMMING DRIVERDimming Driver

40 Watt / 24 volt LED Magnetic DIMMABLE hard wire driver in a junction box. 120V AC Input. Compatible with most Magnetic Low Voltage dimmers (see list)
Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system .
Note: ONLY FOR USE WITH 120 Volt AC systems and a compatible dimmer switch. If you will not be dimming - DO NOT USE
5.03" L × 2.14" W × 2" H
Click for specs and compatible dimmers

$89.00
each



Quantity

60L24DC
DIMMING DRIVERDimming Driver

60 Watt / 24 volt LED Magnetic DIMMABLE hard wire driver in a junction box. 120V AC Input. Compatible with most Magnetic Low Voltage dimmers (see list)
Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system .
Note: ONLY FOR USE WITH 120 Volt AC systems and a compatible dimmer switch. If you will not be dimming - DO NOT USE
6.06" L × 2.59" W × 2.2" H
Click for specs and compatible dimmers

$99.00
each



Quantity

96L24DC
DIMMING DRIVERDimming Driver

96 Watt / 24 volt LED Magnetic DIMMABLE hard wire driver in a junction box. 120V AC Input. Compatible with most Magnetic Low Voltage dimmers (see list)
Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system .
Note: ONLY FOR USE WITH 120 Volt AC systems and a compatible dimmer switch. If you will not be dimming - DO NOT USE
6.06" L × 2.59" W ×2.2" H
Click for specs and compatible dimmers

$109.00
each



Quantity

150L24DC
DIMMING DRIVERDimming Driver

150 Watt / 24 volt LED Magnetic DIMMABLE hard wire driver in a junction box. 120V AC Input. Compatible with most Magnetic Low Voltage dimmers (see list)
Use with the DL-FLEX-PC-HW or DL-FLEX-PC2-HW in step 3 above to connect to your system .
Note: ONLY FOR USE WITH 120 Volt AC systems and a compatible dimmer switch. If you will not be dimming - DO NOT USE
9.17" L × 3.06" W × 2.94" H
Click for specs and compatible dimmers

$119.00
each



Quantity

Step 5 - (Optional) If desired, order one of our exclusive "Plug 'N Play" dimmer controls below

LC-DIM-5A

This optional dimming controller connects between the LED driver and the DL-FLEX-UP allowing you dim the LED-FLEX-UP system from 100% to 0 % using the build in dial control on top. Easy plug-in installation.
Size is 4 1/8L x 1 3/4"W x 1 1/8"D

$195.00
each



Quantity

LC-DIM100-RF

This optional step dimming controller operates off of a remote control unit (included) and connects between the LED driver and the DL-FLEX-UP allowing you dim the LED-FLEX-UP system from 100% to 0 % using the remote control only (step type dimming - not continuous) . Easy plug-in installation or optionally may be hard wired. Please note: The dimming operation is controlled by the remote unit only and controller can be located remotely
Size of the controller is 7L x 1 5.8W x 7/8"D

$255.00
each



Quantity

LC-DIM5A-HW
Slim Stix hard wire dimming module

For hard wire dimming installations with a power supply other than the Magnetic Dimmers (for example: a 277 volt dimming system) use the LC-DIM5A-HW. This optional hard wire dimming controller is designed to operate off of a separate 0-10V dimmer switch (available elsewhere - call for compatibility). and provides smooth dimming down to 5%.
6 1/4" L × 3" W × 1 1/2" H

$179.00
each



Quantity

For other available options to our DL-FLEX-UP System, including larger drivers, hard wire type power supply systems, other dimming options, carpet runs, etc. please call us at 1-800-841-4666 or email us at sales@brodwax.com

 

     
   
 
Home | Fluorescent Lighting Fixtures | LED Under Cabinet Lighting
| Contact Us | FAQ | Links | Policies | Site Map | Order Status
   
   
 
Brodwax Lighting Corporation • 4383 NW 124th Ave • Coral Springs • FL 33065
Phone: 800-841-4666 • Fax: 954-255-1715 • info@brodwax.com